1/12scale Fulldetail Kit : 312T3



[ 312T3について - About the 312T3 - ]

フェラーリチームにおいて1970年から75年にかけてグランプリで活躍した312Bシリーズに替わり、新たに開発されたマシンが312Tでした。312Tは312Bシリーズに引き続き水平対向12気筒エンジンを搭載、横置きギアボックスやアルミセミモノコック構造を採用するなどの改良が施され、1975年のチャンピオンに輝きました。続き新たな空力規則に合わせて改良された312T2が1976、77年と連続してチャンピオンを獲得しました。
そして迎えた1978年シーズン、さらなる改良を施されたマシンとしてグランプリを戦ったマシンが312T3です。312T3は1970年から継続して水平対向12気筒エンジンを搭載していましたが、312T2からモノコック構造、サスペンション、空力面での改良が施されたマシンでした。さらに大きな変化として、これまでのグッドイヤーからミシュラン製ラジアルタイヤに変更したことが挙げられます。T2より戦闘力を増したT3でしたが、グラウンド・エフェクトカーであるLOTUS 79がその強さを発揮、コンストラクターズタイトルはLOTUSに及ばず2位となりました。それでも、C.ロイテマンが312T3で3勝を挙げ、G.ヴィルヌーヴが最終戦母国カナダGPで自身初優勝を挙げる活躍を見せました。

The 312T was developed to replace the 312B, which represented the Ferrari team between 1970 till 1975. While it continued to used the same flat 12 engine found in the 312B, it also featured upgrades such as a transverse mounted gearbox and an aluminum monocoque. The 312T took the championship for 1975, and it was further upgraded into the 312T2 (in which changes were made to comply with new aerodynamic rules at the time), which managed to take the championship for 1976 and 1977 also.
In 1978, the car was further developed into the 312T3. While it continued to use the flat 12 engine from 1970, changes were made to the monocoque, suspensions and aerodynamic surfaces compared to the 312T2. This and other adjustments were made so the car would work with Michelin's radial tires as they had replaced the Goodyear tires used up to this point. While the T3 had better specs than the T2, it was no match for the “ground effect” car – the Lotus 79. While it was only able to take 2nd place in constructors after Lotus, C.Reutemann managed to take 3 wins with the car and G.Villeneuve managed to take his maiden victory at home in the final Canadian GP.


[ キット概要 -Kit Details- ]

■1978年シーズン、312T3は、初登場した第3戦南アフリカGPと第4戦U.S.west GPのロイテマン車のみにノーズ上面の左右から吸気できるようなインテーク・ノーズカウルが搭載されていました。この特徴的なボディ形状を持つマシンの内、ロイテマンが優勝を飾ったU.S.west GP仕様をモデル化しました。
■ホイールリム・エンジンファンネル・ホイールシャフト/ロックナット・マフラーエンド・テールランプ台座、フロントダンパートップの各パーツは金属挽き物製で質感高く再現できます。
■ボディカウル・ノーズは脱着が可能で、完成後も内部構造を見ることができます。

- during the first two races of the 312T3 in 1978 at Rd.3 South African GP and Rd.4 U.S. West GP, Reutemann's car features two intakes on the left and right side of the nose cowl. This kit is based on this early build of the car - specifically the version Reutemann drove to the victory at the U.S.West GP.
- a full detailed, multi-material kit featuring white metal, resin, etching, vacuum parts, rubber tires, silk screen decals and various cords allowing for maximum representation of the original vehicle.
- aluminum turned parts used for wheel rim, engine funnel, wheel shaft, lock nut, muffler end, tail lamp base and front damper top.
- body cowl and nose can be removed, allowing full view of the detailed interior after completion.





[ パーツ・リスト -Parts List- ]





●K794 - Fulldetail Kit : 312T3
1978 Rd.4 U.S. GP West [Long Beach GP] winner #11 C.Reutemann

[ 2021年8月発売 / August 2021 Released ]

1/12scale Fulldetail Kit : 312T3

価格:

73,700円 (本体 67,000円、税 6,700円)

購入数: pcs

在庫

×

返品期限・条件 返品についての詳細はこちら

ページトップへ